Guide: Standard Labels

HAND WASH ONLY!

Here you’ll find a guide for standard, cut-to-word label applications. These instructions can be followed for our labels that are cut to the lettering or shape and require transfer tape.

Tips and Videos of Application

1

Clean

Clean the area with water. Do not use detergent or washing up liquid as these leave a residue. Dry the area thoroughly.
2

Remove

Place the label on a hard flat surface and remove the label from the carrier sheet, with the transfer tape. Rub with a card for 30 seconds if needed to assist in adhering the label to the transfer tape.
3

Apply

Line the label up to your desired position and apply to the surface. Smooth over the decal with a credit card or squeegee firmly with your hands.
4

Smooth

Remove the clear transfer tape from the front of the label and allow it to adhere to your surface for 24 hours.