Guide: Iron On Glitter Labels
Care guide – WASH UP TO 40 DEGREES DO NOT TUMBLE DRY!
How to look apply and care for your Glitter Iron On Labels. IMPORTANT: Please do not iron directly onto the heat transfer application film or tape. If you have any issues during application please do not throw any parts away and contact us to discuss the issue.
What’s Included?
Your glitter decal/s, 1 x sheet of greaseproof paper.
Please watch these tutorials for help with the application.
Placement
Place your decal on your garment and firmly press down. The name should be the correct way around.
Heat
Check your iron's heat range. Turn off the steam function and adjust the temperature to a setting that is between 160 and 200 degrees.
Temperature
If your iron does not reach 160 degrees the label will not adhere to the fabric. If you set the iron too hot this may melt the label. Please check your settings and temperatures carefully.
Application
Place a sheet of greaseproof paper over the top of the area. Iron firmly in bursts of 5 seconds, checking the label after each turn.
Application
Once fully adhered slowly remove the transfer tape. Place the silicone paper back over the decal and iron again for 5 seconds. Please wait 24 hours before washing your garment.
Two Layers
If your decal has 2 colours repeat this process for the second decal layer.
